Resiflow P-67

Resiflow P-67 is a flow and leveling agent known for its suitability and reliable performance across the spectrum of binder chemistries including polyesters, polyurethanes, hybrids, epoxies, and acrylics.  Broad compatibility between powder coatings is another key characteristic of Resiflow P-67.  The product is based on a liquid acrylic polymer that has been converted into free-flowing powder by adsorption onto silica-type filler.  For best results, Resiflow P-67 should be dry blended with other coating raw materials, then homogenized in a heated extruder.  The active ingredient is released and homogenized with the other components during extrusion, creating a compositionally uniform system.  Surface defects such as orange peel, craters, pinholes, and other imperfections can be reduced or eliminated by incorporating 0.7-1.5% of Resiflow P-67 into pigmented powder coating formulations. It is not recommended for use in clears. As with any silica supported flow control agent, Resiflow P-67 should be thoroughly evaluated to determine the best processing method and the optimum concentration of the additive, suitability for the application, as well as to test compatibility and recoat adhesion.

Resiflow P-67 is a flow and leveling agent known for its suitability and reliable performance across the spectrum of binder chemistries including polyesters, polyurethanes, hybrids, epoxies, and acrylics.  Broad compatibility between powder coatings is another key characteristic of Resiflow P-67.  The product is based on a liquid acrylic polymer that has been converted into free-flowing powder by adsorption onto silica-type filler.  For best results, Resiflow P-67 should be dry blended with other coating raw materials, then homogenized in a heated extruder.  The active ingredient is released and homogenized with the other components during extrusion, creating a compositionally uniform system.  Surface defects such as orange peel, craters, pinholes, and other imperfections can be reduced or eliminated by incorporating 0.7-1.5% of Resiflow P-67 into pigmented powder coating formulations. It is not recommended for use in clears. As with any silica supported flow control agent, Resiflow P-67 should be thoroughly evaluated to determine the best processing method and the optimum concentration of the additive, suitability for the application, as well as to test compatibility and recoat adhesion.